461 series normally open terminated operating voltage: (across temperature range) 12 vdc (11-14 vdc) 28 vdc (24-32 vdc) coil current (max @ nom.vdc & 20?): 12 vdc 400 ma 28 vdc 160 ma switching time: 15 ms maximum operating temperature: -25? to +65? (standard) -55? to +85? (extended ? option) mechanical life, cycles: 1,000,000 minimum vibration, operating: 10 g rms, 20-2000 hz mechanical shock, non-operating: 50 g, 1/2 sine, 11 ms nominal weight: 10.0 oz., (275g.) specifications 431-461 series normally open terminated sma rf characteristics mechanical part number selection iso 9001 certified 3-3 www.dowkey.com c commercial m military a avionics s space for electrical schematic see page # 3-9 frequency vswr isolation ins. loss ghz (max) db (min) db (max) dc-4 1.20 80 0.20 4-8 1.30 70 0.30 8-12.4 1.40 65 0.40 12.4-18 1.50 60 0.50 *18-22 1.60 60 0.60 *22-26 1.60 55 0.60 note: rf power for the terminated port is limited by the termination. * ? option only 461-530823 shown j 5 2 08 03 a 431 special options family actuator coil voltage connectors indicators / terminations circuit options c = mounting bracket j = 9 or 15 pin 'd' connector k = 26.56 ghz l = flange mount p = power plug r = (-) com (used with supp. diodes only) s = epoxy seal t = -55?to +85?c 2 = failsafe, position 1 5 = normally open 6 = failsafe, position 1 suppression diodes (com +) 9 = normally open suppression diodes (com +) 2 = 12vdc 3 = 28vdc 8 = 24vdc 9 = 15vdc 08 = sma female 03 = no indicators 2w terminations 08 = no indicators sma female 23 = spst indicators 2w terminations 28 = spst indicators sma female a = ttl high l = ttl low 431 = sp3t 441 = sp4t 461 = sp6t
mp latching series electrical schematics iso 9001 certified 3-17 www.dowkey.com 1 latching self cutoff 2 latching self cutoff ttl 3 latching sco terminated 4 latching sco terminated ttl -vdc -vdc ttl inputs optional indicators optional indicators optional indicators optional indicators logic low (off) = 0 - 0.8vdc logic high (on) = 2.4 - 5.5vdc logic low (off) = 0 - 0.8vdc logic high (on) = 2.4 - 5.5vdc ttl inputs
|